By

Alan W. Cramb

Department of Materials Science and Engineering

Carnegie Mellon University

Process Metallurgy is one of the oldest applied sciences. Its history can be traced back to 6000 BC. Admittedly, its form at that time was rudimentary, but, to gain a perspective in Process Metallurgy, it is worthwhile to spend a little time studying the initiation of mankind's association with metals. Currently there are 86 known metals. Before the 19th century only 24 of these metals had been discovered and, of these 24 metals, 12 were discovered in the 18th century. Therefore, from the discovery of the first metals - gold and copper until the end of the 17th century, some 7700 years, only 12 metals were known. Four of these metals, arsenic, antimony , zinc and bismuth , were discovered in the thirteenth and fourteenth centuries, while platinum was discovered in the 16th century. The other seven metals, known as the Metals of Antiquity, were the metals upon which civilisation was based. These seven metals were:

(1) Gold (ca) 6000BC

(2) Copper,(ca) 4200BC

(3) Silver,(ca) 4000BC

(4) Lead, (ca) 3500BC

(5) Tin, (ca) 1750BC

(6) Iron,smelted, (ca) 1500BC

(7) Mercury, (ca) 750BC

These metals were known to the Mesopotamians, Egyptians, Greeks and the Romans. Of the seven metals, five can be found in their native states, e.g., gold, silver, copper, iron (from meteors) and mercury. However, the occurrence of these metals was not abundant and the first two metals to be used widely were gold and copper.

Views: 99

Replies to This Discussion

Gold
Gold articles are found extensively in antiquity mainly as jewelry e.g. Bracelets, rings etc. Early gold artifacts are rarely pure and most contain significant silver contents. This led to the ancients naming another metal - electrum, which was an alloy of gold and silver, pale yellow and similar in color to amber. Therefore, early gold varied from pure through electrum to white gold. The symbol for gold is Au from the latin aurum meaning shining dawn.

Stone age man learned to fashion gold into jewelry and ornaments, learning that it could be formed into sheets and wires easily. However, its malleability, which allows it to be formed into very thin sheet (0.000005 inches), ensures that it has no utilitarian value and early uses were only decorative. As gold is a noble metal, being virtually noncorrosive and tarnish free, it served this purpose admirably.

Gold is widely dispersed through the earth's crust and is found in two types of deposits : lode deposits, which are found in solid rock and are mined using conventional mining techniques, and placer deposits which are gravelly deposits found in stream beds and are the products of eroding lode deposits. Since gold is found uncombined in nature, early goldsmiths would collect small nuggets of gold from stream beds etc., and then weld them together by hammering.

Thus we find the first problem in process metallurgy : The metal deposit must be identified. In the case of the first metals color was the most important factor as it allowed the metal to be recognized in surrounding rock, stones, gravel and dirt (gangue) and separated. Clearly, after recognition, separation is next problem followed by concentration. These three steps are very important and the economics of these steps usually define whether it is viable to produce the metal from a set deposit. In the early days all three steps were carried out simultaneously. Gold is widely dispersed throughout the earths crust (0.005 ppm) at a very small level, therefore, it is very important to find naturally occurring concentrations. The scarcity of gold and its value, due to mankinds fascination with its color, have lead to gold being the one of the more important metals in daily life.

Copper

The use of copper in antiquity is of more significance than gold as the first tools, implements and weapons were made from copper. From 4,000 to 6,000 BC was the Chalcolithic period which was when copper came into common use. The symbol for copper is Cu and comes from the latin cuprum meaning from the island of Cyprus. Initially copper was chipped into small pieces from the main mass. The small pieces were hammered and ground in a manner similar to the techniques used for bones and stones. However, when copper was hammered it became brittle and would easily break. The solution to this problem was to anneal the copper. This discovery was probably made when pieces were dropped in camp fires and then hammered. By 5,000 BC copper sheet was being made.

By 3600 BC the first copper smelted artifacts were found in the Nile valley and copper rings, bracelets, chisels were found. By 3000 BC weapons, tools etc. were widely found. Tools and weapons of utilitarian value were now within society, however, only kings and royalty had such tools; it would take another 500 years before they reached the peasants.

Malachite, a green friable stone, was the source of copper in the early smelters. Originally it was thought that the smelting of copper was by chance dropping of malachite into campfires. However, campfire temperatures are normally in the region of 600-650 C, whereas, 700-800 C is necessary for reduction. It is more probable that early copper smelting was discovered by ancient potters whose clay firing furnaces could reach temperatures of 1100-1200 C. If Malachite was added to these furnaces copper nodules would easily be found. Although the first smelted copper was found in the Nile valley, it is thought that this copper was brought to Egypt by the Gerzeans and copper smelting was produced first in Western Asia between 4000 and 4300 BC.

Although copper can be found free in nature the most important sources are the minerals cuprite, malachite, azurite, chalcopyrite and bornite. Copper is reddish colored, malleable, ductile and a good conductor of heat and electricity. Approximately 90% 0f the worlds primary copper originates in sulfide ores.

Lead

Lead is not found free in nature but Galena (lead sulfide) was used as an eye paint by the ancient Egyptians. Galena has a very metallic looking appearance and was, therefore, likely to attract the attention of early metalworkers. The production of metallic lead from its ore is relatively easy and could have been produced by reduction of Galena in a camp fire. The melting point of lead is 327 C, therefore, it would easily flow to the lowest point in the fireplace and collect. At first lead was not used widely because it was too ductile and the first uses of lead were around 3500 B.C.. Lead's use as a container and conduit was important and lead pipes bearing the insignia of Roman emperors can still be found. Lead is highly malleable, ductile and noncorrosive making it an excellent piping material. Its symbol is Pb from the latin plumbum.

The ability of lead to flow and collect at the bottom of the campfire is an important concept in process metallurgy as reduction reactions to be useful must cause a phase separation between the metal and the gangue. Also, the phase separation should also enable the metal to be cast into a desired shape once concentrated.

Silver

Although silver was found freely in nature, its occurrence was rare. Silver is the most chemically active of the noble metals, is harder than gold but softer than copper. It ranks second in ductility and malleability to gold. It is normally stable in pure air and water but tarnishes when exposed to ozone, hydrogen sulfide or sulfur. Due to its softness, pure silver was used for ornaments, jewelry and as a measure of wealth. In a manner similar to gold, native silver can easily be formed. Silver's symbol is Ag from the latin argentum.

Galena always contains a small amount of silver and it was found that if the lead was oxidized into a powdery ash a droplet of silver was left behind. Another development in this process was the discovery that if bone ash was added to the lead oxide, the lead oxide would be adsorbed and a large amount of material could be processed. By 2500 BC the cupellation process was the normal mode of silver manufacture.

Tin

Smelted copper was rarely pure, in fact, it is clear that by 2500 BC the Sumerians had recognized that if different ores were blended together in the smelting process, a different type of copper, which flowed more easily, was stronger after forming and was easy to cast, could be made. An axe head from 2500 BC revealed that it contained 11% tin and 89% copper. This was of course the discovery of @b(Bronze). However, by 2000 BC copper implements contained very little tin as local reserves of tin had been exhausted. The Sumerians were forced to travel to find the necessary ores. Bronze was a much more useful alloy than copper as farm implements and weapons could be made from it, however, it needed the discovery of tin to become the alloy of choice.

Native Tin is not found in nature. The first tin artifacts date back to 2000 B.C., however, it was not until 1800 B.C. that tin smelting became common in western Asia. Tin was reduced by charcoal and at first was thought to be a form of lead. The Romans referred to both tin and lead as plumbum where lead was plumbum nigrum and tin was plumbum candidum. Tin was rarely used on its own and was most commonly alloyed to copper to form bronze. The most common form of tin ore is the oxide casserite. By 1400 BC. bronze was the predominant metal alloy. Tin's symbol is Sn from the stannum.

Tin is highly malleable and ductile and has two allotropic forms which lead to tin initially having its own disease (tin pest or blight) which was actually formation of alpha-tin below 13 C. As alpha-tin is a highly friable cubic structure with a greater specific volume than beta-tin, during the phase change, which is kinetically limited, nodules of alpha-tin become visible on the surface of beta-tin giving rise to early belief of sickness and the first true doctors of metallurgy. Tin is highly crystalline and during deformation is subject to mechanical twinning and an audible tin cry. Tin is also quite resistant to corrosion.

Tin is found as vein tin or stream tin. The tin ore is stannic oxide and is generally found with quartz, feldspar or mica. The ore is a hard , heavy and inert substance and is generally found as outcroppings as softer impurities are washed away.

Mercury

Mercury was also known to the ancients and has been found in tombs dating back to 1500 and 1600 BC. Pliny, the Roman chronicler, outlined purification techniques by squeezing it through leather and also noted that it was poisonous. Mercury, also known as quicksilver, is the only metal which is liquid at room temperature. Although it can be found in its native state, it is more commonly found in such ores as calomel, livingstonite, corderite and its sulfide cinnabar. Extraction is most simply carried out by distillation as mercury compounds decompose at moderate temperatures and volatilize.

Mercury was widely used because of its ability to dissolve silver and gold (amalgamation) and was the basis of many plating technologies. There is also indications that it was prized and perhaps worshipped by the Egyptians. In 315 B.C., Dioscorides mentions recovery of quicksilver (which he called hydrargyros, liquid silver) by distillation, stating " An iron bowl containing cinnabar is put into an earthenware container and sealed with clay. It is then set on a fire and the soot which sticks to the cover is quicksilver". Methods changed little until the 18th century. Mercury's symbol is Hg from hydragyrum, liquid silver.

Iron
Iron was available to the ancients in small amounts from meteors. This native iron is easily distinguishable because it contains 6-8% nickel. There is some indication that man-made iron was available as early as 2500 B.C., however, ironmaking did not become an everyday process until 1200 BC. Hematite, an oxide of iron, was widely used by the ancients for beads and ornaments. It is also readily reduced by carbon. However, if reduced at temperatures below 700-800 C it is not suitable for forging and must be produced at temperatures above 1100 C. Wrought iron was the first form of iron known to man. The product of reaction was a spongy mass of iron intermixed with slag. This was then reheated and hammered to expel the slag and then forged into the desired shape. In the early days iron was 5 times more expensive then gold and its first uses were as ornaments.

Iron weapons revolutionized warfare and iron implements did the same for farming. Iron and steel was the building block for civilization. Interestingly, an iron pillar dating to 400 A.D., remains standing today in Delhi, India. Corrosion to the pillar has been minimal a skill lost to current ironworkers. Iron is rarely found in its native state the only known sources being Greenland where the iron occurs as nodules in basalt that erupted through beds of coal and two very rare nickel-iron alloys. Iron's symbol is Fe from the latin ferrum.

These seven metals: gold, silver, copper, lead, tin, mercury and iron, and the alloys bronze and electrum were the starting point of metallurgy and even in this simple, historic account we find some of the basic problems of process metallurgy. The problems are:

The ores must be found, separated and sized before use.

The ores must be reacted under a controlled temperature and gas atmosphere.

The liquid metal must be collected and cast into a desired shape.

The metal must be worked to achieve desired final properties and shape.

RSS

Birthdays

Important (read & understand)

How to Contact us:Preferred Contact point

Skype: Travelingraggyman

 

Email and Instant Messenger:

TravelerinBDFSM @ aol/aim;  hotmail; identi.ca; live & yahoo

OR

Travelingraggyman @ gmail and icq ***

***

Find us on Google+

Please vote for Our Site. You can vote once a day. Thank you for your support. just click on the badge below
Photobucket

OUR MOST RECENT  AWARD


1AWARD UPDATES & INFORMATION
10,000 votes - Platinum Award
5,000 votes - Gold Award
2,500 votes - Silver Award
1,000 votes - Bronze Award
300 votes - Pewter Award
100 votes - Copper Award


Member of the Associated  Posting System {APS}

This allows members on various sites to share information between sites and by providing a by line with the original source it credits the author with the creation.

Legal Disclaimer

***************We here at Traveling within the World are not responsible for anything posted by individual members. While the actions of one member do not reflect the intentions of the entire social network or the Network Creator, we do ask that you use good judgment when posting. If something is considered to be inappropriate it will be removed

 

This site is strictly an artist operational fan publication, no copyright infringement intended

Patchwork Merchant Mercenaries had its humble beginnings as an idea of a few artisans and craftsmen who enjoy performing with live steel fighting. As well as a patchwork quilt tent canvas. Most had prior military experience hence the name.

 

Patchwork Merchant Mercenaries.

 

Vendertainers that brought many things to a show and are know for helping out where ever they can.

As well as being a place where the older hand made items could be found made by them and enjoyed by all.

We expanded over the years to become well known at what we do. Now we represent over 100 artisans and craftsman that are well known in their venues and some just starting out. Some of their works have been premiered in TV, stage and movies on a regular basis.

Specializing in Medieval, Goth , Stage Film, BDFSM and Practitioner.

Patchwork Merchant Mercenaries a Dept of, Ask For IT was started by artists and former military veterans, and sword fighters, representing over 100 artisans, one who made his living traveling from fair to festival vending medieval wares. The majority of his customers are re-enactors, SCAdians and the like, looking to build their kit with period clothing, feast gear, adornments, etc.

Likewise, it is typical for these history-lovers to peruse the tent (aka mobile store front) and, upon finding something that pleases the eye, ask "Is this period?"

A deceitful query!! This is not a yes or no question. One must have a damn good understanding of European history (at least) from the fall of Rome to the mid-1600's to properly answer. Taking into account, also, the culture in which the querent is dressed is vitally important. You see, though it may be well within medieval period, it would be strange to see a Viking wearing a Caftan...or is it?

After a festival's time of answering weighty questions such as these, I'd sleep like a log! Only a mad man could possibly remember the place and time for each piece of kitchen ware, weaponry, cloth, and chain within a span of 1,000 years!! Surely there must be an easier way, a place where he could post all this knowledge...

Traveling Within The World is meant to be such a place. A place for all of these artists to keep in touch and directly interact with their fellow geeks and re-enactment hobbyists, their clientele.

© 2024   Created by Rev. Allen M. Drago ~ Traveler.   Powered by

Badges  |  Report an Issue  |  Terms of Service