FAQ

Frequently Asked Questions

http://www.sharppointythings.com/faq.php

Views: 185

Replies to This Discussion

Q: Can you do gem-studded swords or swords with precious metal fittings?

A: Absolutely. Keep in mind that precious metals cost by the ounce, and that you’ll need several ounces. You must either provide the gems or we have to get them from a jeweler. The cost for any such sword will be in the thousands. We will be happy to quote such a project if you are serious, but please don’t ask if you’re hoping to get one for a few dollars. It cannot be done.

http://www.sharppointythings.com/faq.php

Q: Can you use titanium, because it’s stronger than steel?

A: We can. Titanium is stronger, but it is less wear resistant, and will not provide as good an edge. This is used in blades that require a low magnetic signature, as in working around certain explosives. We don’t recommend it for normal usage.

http://www.sharppointythings.com/faq.php

Q: What is my sword worth?

A: To answer this, we have to see a picture. Only the roughest estimates (“More (or less) than a thousand”) can be given on a description, unless you have a standard commercial product that isn’t worth much. A detailed, clear picture at least, and often a close personal inspection are necessary for this. Please note that we give estimates for purchasing insurance or general information. As to appraisals of exact market value, that will depend on many factors, and we are not specialists in all areas. We may be able to refer you to a specialist in your type of blade if we cannot do this.

http://www.sharppointythings.com/faq.php

Q: Are WWII katanas valuable?

A: WWII Japanese blades are not katanas, and are not typically very valuable. They range from $50 to $1000, and over $500 is a rare sword indeed. These were produced by the millions for soldiers, and do not represent the best craftsmanship of the Japanese smith. A sword with documentation as to the owner or maker will usually be worth more, depending on condition.

http://www.sharppointythings.com/faq.php

Q: My sword was taken off a high-ranking officer by a relative of mine. That means it’s more valuable, right?

A: That depends. Do you have a photo, a letter from the officer, or some other way to document it? If not, no. During wartime, stories get confused, misheard, and exaggerated. For example, an officer with a star on his helmet will be called a general, when in fact he was a simple Japanese Marine lieutenant.

http://www.sharppointythings.com/faq.php

Q: I have a sword from the Japanese Royal Armory/presented by the Emperor…

A: No, you don’t. No such blades have ever left Japan, even in wartime. This is a common claim, and is simply not true. Such blades do not bear specific markings, and the Emperor never associated with common US military officers. If you have a photo of said sword being presented by the Emperor, you’ll be the first in history.

http://www.sharppointythings.com/faq.php

Q: How much are Civil War swords worth?

A: Presumably, you refer to the US Civil War, not the English, Irish, or other. Depending on the sword, anywhere from nothing to tens of thousands. Bet on the low end unless you have two expert appraisals to the contrary. Also, there are later issue blades of the same style, millions of fakes and modern reproductions out there. Don’t assume you’re getting a deal on a low price. It may be worth even less than that fantastic price.

http://www.sharppointythings.com/faq.php

Q: What’s the best blade steel?

A: That all depends on what you want the blade to do. There are literally dozens of good blade steels. We need to know your specific usage to recommend one.

http://www.sharppointythings.com/faq.php

Q: Can you laser sharpen blades?

A: Lasers cut, they do not sharpen. The kerf (material cut away) of an industrial laser averages .008 inches. A good edge is finer than this. Additionally, the heat involved would damage the temper of the edge. There is no such thing as laser sharpening.

http://www.sharppointythings.com/faq.php

Q: Can you make a sword just like this one I saw on a book cover?

A: Possibly. That depends on the picture, as most artists have only the haziest notions of blade design. It depends on how elaborate the design is, and it depends on your pocket book. Our custom made swords start around $500. See the question above regarding jewels and precious metals. If you wish a good costume piece that doesn’t cost a fortune, we can try. But it also matters on what picture we’re working from. Remember: elaborate is never cheaper than plain. Additionally, we will want to contact the artist and make sure they don’t object to someone copying their design.

http://www.sharppointythings.com/faq.php

Q: How much do swords cost?

A: The cheapest reproduction in our store is about $35. You get what you pay for. The most expensive commercial sword we carry is about $2000. Again, you get what you pay for. We can find some good quality pieces around $200. Below that, the quality will lack in one or more areas. Above that, the quality goes up.

http://www.sharppointythings.com/faq.php

Q: Can you make a blade just like those carried by the Saxons/Vikings/Mongols/ Imperial French/Ancient Greeks/etc.

A: Certainly. We have a 3000 volume reference library on the subject, and can work from your pictures or ours. Bear in mind that peasant tools and weapons were quite basic. European peasant knives, for example, bear a striking resemblance to modern steak knives. This was what they were typically used for, after all.

http://www.sharppointythings.com/faq.php

RSS

Birthdays

There are no birthdays today

Important (read & understand)

How to Contact us:Preferred Contact point

Skype: Travelingraggyman

 

Email and Instant Messenger:

TravelerinBDFSM @ aol/aim;  hotmail; identi.ca; live & yahoo

OR

Travelingraggyman @ gmail and icq ***

***

Find us on Google+

Please vote for Our Site. You can vote once a day. Thank you for your support. just click on the badge below
Photobucket

OUR MOST RECENT  AWARD


1AWARD UPDATES & INFORMATION
10,000 votes - Platinum Award
5,000 votes - Gold Award
2,500 votes - Silver Award
1,000 votes - Bronze Award
300 votes - Pewter Award
100 votes - Copper Award


Member of the Associated  Posting System {APS}

This allows members on various sites to share information between sites and by providing a by line with the original source it credits the author with the creation.

Legal Disclaimer

***************We here at Traveling within the World are not responsible for anything posted by individual members. While the actions of one member do not reflect the intentions of the entire social network or the Network Creator, we do ask that you use good judgment when posting. If something is considered to be inappropriate it will be removed

 

This site is strictly an artist operational fan publication, no copyright infringement intended

Patchwork Merchant Mercenaries had its humble beginnings as an idea of a few artisans and craftsmen who enjoy performing with live steel fighting. As well as a patchwork quilt tent canvas. Most had prior military experience hence the name.

 

Patchwork Merchant Mercenaries.

 

Vendertainers that brought many things to a show and are know for helping out where ever they can.

As well as being a place where the older hand made items could be found made by them and enjoyed by all.

We expanded over the years to become well known at what we do. Now we represent over 100 artisans and craftsman that are well known in their venues and some just starting out. Some of their works have been premiered in TV, stage and movies on a regular basis.

Specializing in Medieval, Goth , Stage Film, BDFSM and Practitioner.

Patchwork Merchant Mercenaries a Dept of, Ask For IT was started by artists and former military veterans, and sword fighters, representing over 100 artisans, one who made his living traveling from fair to festival vending medieval wares. The majority of his customers are re-enactors, SCAdians and the like, looking to build their kit with period clothing, feast gear, adornments, etc.

Likewise, it is typical for these history-lovers to peruse the tent (aka mobile store front) and, upon finding something that pleases the eye, ask "Is this period?"

A deceitful query!! This is not a yes or no question. One must have a damn good understanding of European history (at least) from the fall of Rome to the mid-1600's to properly answer. Taking into account, also, the culture in which the querent is dressed is vitally important. You see, though it may be well within medieval period, it would be strange to see a Viking wearing a Caftan...or is it?

After a festival's time of answering weighty questions such as these, I'd sleep like a log! Only a mad man could possibly remember the place and time for each piece of kitchen ware, weaponry, cloth, and chain within a span of 1,000 years!! Surely there must be an easier way, a place where he could post all this knowledge...

Traveling Within The World is meant to be such a place. A place for all of these artists to keep in touch and directly interact with their fellow geeks and re-enactment hobbyists, their clientele.

© 2024   Created by Rev. Allen M. Drago ~ Traveler.   Powered by

Badges  |  Report an Issue  |  Terms of Service