Dagger Hilts and associated short blades

 

Our steel hilts are currently available in several models, finishes, and guard types. This allows for a range of customization to meet the buyer's requirements. All hilts come in either a factory blue black or wire brushed gray finish. Rod tang blades are mounted with wooden grips banded at both ends to eliminate splitting. These come in a natural wood or black stain finish. Other colors are available on request. All hilts are mounted with pommels of appropriate weight for the selected blade. Customers may request a lighter or heavier pommel. We currently produce two perforation patterns. The first of these is based on a Pappenheimer rapier in the collection of the Cleveland Museum Of Art.

 

http://www.alcheminc.com/daggerhilts.html

Views: 433

Replies to This Discussion

Cutlass Hilts

The above is a photo of our simple munitions grade naval cutlass hilt. This example is similar to authentic naval cutlasses in many collections. The one difference is, we have given our product a four and one half inch wide bell for extra hand protection. Additionally, our bell is hand forged from 14 gauge steel for extra strength. Our cutlass hilts may be orderered mounted on either the straight or curved versions of our long blades. This hilt is also available on our Safeflex model 15/6 dagger blade.

Prices are as follows:
Cutlass hilts alone (any finish, or guard shape) $95 US ($90 foreign) 1.08pounds = .49kgs

Hilt with Alchem rod tang Safeflex schlager/rapier blade (any finish, or guard shape) $155 US ($150 foreign) 1.91pounds = .87kgs

Hilt with Alchem rod tang Safeflex broadsword blade (any finish, or guard shape) $155 US ($150 foreign) 1.91pounds = .87kgs

Hilt with up to 40" flat tang blade (any finish, or guard shape) $170 US ($165 foreign) 3.08pounds = 1.40kgs

Add extra curve to your blade $10 US
Hilt with Safeflex 15/6 dagger blade (any finish, or guard shape) $125 US ($120 foreign) 1.43pounds = .65kgs

When ordering, be sure to specify (PayPal provides for comments to seller)
finish ('B'lack or 'G'ray),

Please note: If not specified, the default is gray.
If your order includes a blade, be sure to also specify
blade length.
blade shape, straight or slightly curved.

Please note: If not specified, the default is 36 inches for long blades, 18 inches for dagger blades, and straight.

http://www.alcheminc.com/cutlass.html

Side Ring Hilts

Above is a photo of our side ring dagger hilt. This consists simply of an 11 3/4 inch long cross guard with one open (unfilled) side ring, a grip and pommel. The side ring measures 2 inches long by 1 1/2 inches wide. An optional perforated plate is available to cover the side ring for an additional charge of $5. This perforated plate is removable. Guards may be ordered straight (I), serpentine (S), or curved forward (C shaped). When ordering a serpentine (S) shaped guard, be sure to specify whether the dagger is to be held in the left or right hand.

Prices are as follows:
Side Ring hilts alone (any finish, or guard shape) $70 US ($67 foreign) 1.08pounds = .49kgs

Hilt with Safeflex 15/6 dagger blade (any finish, or guard shape) $100 US ($95 foreign) 1.43pounds = .65kgs

Add the removable perforated plate $5
Any Destination

When ordering, be sure to specify (PayPal provides for comments to seller)
finish ('B'lack or 'G'ray),
shape for 11 3/4" guards ('I' straight, 'C' curved, 'S' serpentine).
blade length from 15 to 18 inches,

Please note: If not specified, the defaults are gray, straight, 18 inches.

http://www.alcheminc.com/sidering.html

Rondel Hilts

Above is a photo of two of our rondel dagger hilts, one in brushed gray steel with an unstained grip and the other in the blue black finish. Our hilt consists simply of two steel rondels and a steel banded grip. The rondels measure two inches in diameter. This is small enough to allow for a complete range of motion of the wrist in thrusting and parrying. Hardwood grips are five inches long and taper from a diameter of one and one eighth of an inch at the pommel end, down to seven eighths of an inch at the guard end. Grips are slightly oval shaped and flattened on the sides to allow for better edge control. Rondel hilts are sold mounted on one of our Safeflex dagger blades.

Prices are as follows:
Rondel Hilt with Safeflex 15/6 dagger blade (any finish) $100 US ($95 foreign) 1.43pounds = .65kgs

When ordering, be sure to specify (PayPal provides for comments to seller)
finish ('B'lack or 'G'ray),
blade length from 15 to 18 inches,

Please note: If not specified, the default is gray and 18 inch.

http://www.alcheminc.com/rondel.html

Main Gauche Hilts

Prices on fencing main gauche daggers with 11 3/4" quillons are as follows:
Hilts alone (either finish) $75 US ($70 foreign) .80pound = .367kgs


Hilt with Safeflex 15/6 blade $110 US ($105 foreign) 1.16pounds = .527kgs


When ordering main gauche dagger components be sure to specify (PayPal provides for comments to seller)
the piercework design ('M'ercenary, or 'P'appenheimer),
the finish ('B'lack or 'G'ray).
If not straight, the shape for the guard ('C' curved, 'S' serpentine).
If 'S' serpentine, will the dagger be used in the left or right hand?
blade length from 15 to 18 inches,
If not specified, the defaults are pappenheimer, gray, straight, 18 inches.

Photos displayed on this page were provided by H.Ravenwood

http://www.alcheminc.com/maingauche.html

Tanto Hilts

Above is a photo of our tanto dagger hilt. Our hilt consists simply of a tsuba, slightly smaller than on our katanas, and a grip. Grips may be up to 7 1/2 inches long.

Prices are as follows:
Tanto hilts alone (any finish) $70 US ($67 foreign) 1.08pounds = .49kgs

Tanto hilt with Safeflex 15/6 dagger blade (any finish) $105 US ($100 foreign) 1.43pounds = .65kgs

When ordering, be sure to specify (PayPal provides for comments to seller)
finish ('B'lack or 'G'ray),
grip length,
blade length from 15 to 18 inches,

Please note: If not specified, the defaults are gray, natural wood, 7 1/2 inch grip, 18 inch blade.

http://www.alcheminc.com/tanto.html

RSS

Birthdays

Important (read & understand)

How to Contact us:Preferred Contact point

Skype: Travelingraggyman

 

Email and Instant Messenger:

TravelerinBDFSM @ aol/aim;  hotmail; identi.ca; live & yahoo

OR

Travelingraggyman @ gmail and icq ***

***

Find us on Google+

Please vote for Our Site. You can vote once a day. Thank you for your support. just click on the badge below
Photobucket

OUR MOST RECENT  AWARD


1AWARD UPDATES & INFORMATION
10,000 votes - Platinum Award
5,000 votes - Gold Award
2,500 votes - Silver Award
1,000 votes - Bronze Award
300 votes - Pewter Award
100 votes - Copper Award


Member of the Associated  Posting System {APS}

This allows members on various sites to share information between sites and by providing a by line with the original source it credits the author with the creation.

Legal Disclaimer

***************We here at Traveling within the World are not responsible for anything posted by individual members. While the actions of one member do not reflect the intentions of the entire social network or the Network Creator, we do ask that you use good judgment when posting. If something is considered to be inappropriate it will be removed

 

This site is strictly an artist operational fan publication, no copyright infringement intended

Patchwork Merchant Mercenaries had its humble beginnings as an idea of a few artisans and craftsmen who enjoy performing with live steel fighting. As well as a patchwork quilt tent canvas. Most had prior military experience hence the name.

 

Patchwork Merchant Mercenaries.

 

Vendertainers that brought many things to a show and are know for helping out where ever they can.

As well as being a place where the older hand made items could be found made by them and enjoyed by all.

We expanded over the years to become well known at what we do. Now we represent over 100 artisans and craftsman that are well known in their venues and some just starting out. Some of their works have been premiered in TV, stage and movies on a regular basis.

Specializing in Medieval, Goth , Stage Film, BDFSM and Practitioner.

Patchwork Merchant Mercenaries a Dept of, Ask For IT was started by artists and former military veterans, and sword fighters, representing over 100 artisans, one who made his living traveling from fair to festival vending medieval wares. The majority of his customers are re-enactors, SCAdians and the like, looking to build their kit with period clothing, feast gear, adornments, etc.

Likewise, it is typical for these history-lovers to peruse the tent (aka mobile store front) and, upon finding something that pleases the eye, ask "Is this period?"

A deceitful query!! This is not a yes or no question. One must have a damn good understanding of European history (at least) from the fall of Rome to the mid-1600's to properly answer. Taking into account, also, the culture in which the querent is dressed is vitally important. You see, though it may be well within medieval period, it would be strange to see a Viking wearing a Caftan...or is it?

After a festival's time of answering weighty questions such as these, I'd sleep like a log! Only a mad man could possibly remember the place and time for each piece of kitchen ware, weaponry, cloth, and chain within a span of 1,000 years!! Surely there must be an easier way, a place where he could post all this knowledge...

Traveling Within The World is meant to be such a place. A place for all of these artists to keep in touch and directly interact with their fellow geeks and re-enactment hobbyists, their clientele.

© 2024   Created by Rev. Allen M. Drago ~ Traveler.   Powered by

Badges  |  Report an Issue  |  Terms of Service