Linking your favorite traveling artists across the globe
Hand Forged Steel Tent Stakes Square or Rebar 1/2 diameter
US $4.00 Original Price These hand forged tent stakes are made of 1/2" diameter mild steel square stock or rebar, please let me know which upon ordering. The rebar stakes shown measure 20" and the square stakes measure 16". Large order discounts are available. These are made to order and other sizes and diameters can be done. Please message me for pricing on large orders and other size variations.
Inspiration/Story Behind This Product
I use the rebar stakes on my period Panther pavilions side walls. I have been through storms with 70 mile an hour winds hitting my tent directly. While other tents were being torn up and tent stakes being pulled out my tent stood strong. I use 2" wide 18" flat stock with a bar welded across it for my corner stakes. The only time I had problems keeping these stakes in the ground is when there is standing water making the spot a mud hole. To remove the rebar stakes give a slight twist to break the ground around them and they pull right out. Or order one of my medium carbon stake pullers.
These tent stake pullers are made of medium carbon steel and very tough. All you need is a piece of wood to slide in for the handle and you can even use your legs to help you pull.I will need your address to figure out the shipping cost Medium Carbon Tent Stake Puller
Price : $40.00
Flower Pot Holder
Price : $75.00 This flower pot holder is made to be bolted or screwed to the side of your house, barn or other objects. It is made from 1/2" mild steel square and 1" x 1/4" flat. It will have 3 rivets and a matching plate with holes for attaching welded to the back. It may also have some reenforcing welting done below where the rivets are...just to be sure it holds.
I am not sure on the price of shipping for these yet. Please let me know how you want them shipped and I will find out the price.
This hand forged door pull is about 1' in length and can have holes set where you want them for attaching to door. At this time they are bare metal and can be colored to your liking. Fancy Door Pull in Mild Steel Price : $35.00
© 2023 Created by Rev. Allen M. Drago ~ Traveler. Powered by